For some reasons, I'd like to install eric4 IDE to have fun. After I downloaded install package, there's README.txt file shows that the following steps of installation must get them and install them in the following order (order is important). You'd better to follow installation guide from official site, here's just my references to recall while I was installing and learning. So you should always install them depends on your demands.
My environment is Ubuntu 10.04 LTS - the Lucid Lynx
1. Install Qt 4.6.2
1-1. Download http://get.qt.nokia.com/qt/source/qt-everywhere-opensource-src-4.6.3.tar.gz, If you want to install this package, pls follow Qt on X11 Platforms.
After configure, it will show:
Qt is now configured for building. Just run 'make'.
Once everything is built, you must run 'make install'.
Qt will be installed into /usr/local/Trolltech/Qt-4.6.3
To reconfigure, run 'make confclean' and 'configure'.
1-2. Download Qt 4.6.2
The above 4.6.3 version didn't install successfully, so I used "Synaptic Package Manager" to install Qt 4.6.2.
2. Build and install SIP 4.11.1, to see installation
~/python configure.py
This is SIP 4.11.1 for Python 2.6.5 on linux2.
The SIP code generator will be installed in /usr/bin.
The SIP module will be installed in /usr/lib/python2.6/dist-packages.
The SIP header file will be installed in /usr/include/python2.6.
The default directory to install .sip files in is /usr/share/sip.
The platform/compiler configuration is linux-g++.
Creating sipconfig.py...
Creating top level Makefile...
Creating sip code generator Makefile...
Creating sip module Makefile...
~/make
~/sudo make install
make[1]: Entering directory `/home/adam/packages/sip-4.11.1/sipgen'
cp -f sip /usr/bin/sip
make[1]: Leaving directory `/home/adam/packages/sip-4.11.1/sipgen'
make[1]: Entering directory `/home/adam/packages/sip-4.11.1/siplib'
cp -f sip.so /usr/lib/python2.6/dist-packages/sip.so
strip /usr/lib/python2.6/dist-packages/sip.so
cp -f /home/adam/packages/sip-4.11.1/siplib/sip.h /usr/include/python2.6/sip.h
make[1]: Leaving directory `/home/adam/packages/sip-4.11.1/siplib'
cp -f sipconfig.py /usr/lib/python2.6/dist-packages/sipconfig.py
cp -f /home/adam/packages/sip-4.11.1/sipdistutils.py /usr/lib/python2.6/dist-
packages/sipdistutils.py
3. Build and install QScintilla2.4.5, see installation
To build and install QScintilla, run:
~/cd Qt4
~/qmake qscintilla.pro
~/make
~/make install
4. Build and install PyQt4 PyQt-x11-gpl-4.7.6.tar.gz
~/python configure.py
Determining the layout of your Qt installation...
This is the GPL version of PyQt 4.7.6 (licensed under the GNU General Public
License) for Python 2.6.5 on linux2.
Type '2' to view the GPL v2 license.
Type '3' to view the GPL v3 license.
Type 'yes' to accept the terms of the license.
Type 'no' to decline the terms of the license.
Do you accept the terms of the license? yes
Checking to see if the QtGui module should be built...
Checking to see if the QtHelp module should be built...
Checking to see if the QtMultimedia module should be built...
Checking to see if the QtNetwork module should be built...
Checking to see if the QtOpenGL module should be built...
Checking to see if the QtScript module should be built...
Checking to see if the QtScriptTools module should be built...
Checking to see if the QtSql module should be built...
Checking to see if the QtSvg module should be built...
Checking to see if the QtTest module should be built...
Checking to see if the QtWebKit module should be built...
Checking to see if the QtXml module should be built...
Checking to see if the QtXmlPatterns module should be built...
Checking to see if the phonon module should be built...
Checking to see if the QtAssistant module should be built...
Checking to see if the QtDesigner module should be built...
Checking to see if the dbus support module should be built...
DBus v1 does not seem to be installed.
Qt v4.6.2 free edition is being used.
SIP 4.11.1 is being used.
The Qt header files are in /usr/include/qt4.
The shared Qt libraries are in /usr/lib.
The Qt binaries are in /usr/bin.
The Qt mkspecs directory is in /usr/share/qt4.
These PyQt modules will be built: QtCore, QtGui, QtHelp, QtMultimedia,
QtNetwork, QtOpenGL, QtScript, QtScriptTools, QtSql, QtSvg, QtTest, QtWebKit,
QtXml, QtXmlPatterns, QtAssistant, QtDesigner.
The PyQt Python package will be installed in /usr/lib/python2.6/dist-packages.
PyQt is being built with generated docstrings.
PyQt is being built with 'protected' redefined as 'public'.
The Designer plugin will be installed in /usr/lib/qt4/plugins/designer.
The QScintilla API file will be installed in /usr/share/qt4/qsci/api/python.
The PyQt .sip files will be installed in /usr/share/sip/PyQt4.
pyuic4, pyrcc4 and pylupdate4 will be installed in /usr/bin.
Generating the C++ source for the QtCore module...
Creating the Makefile for the QtCore module...
Generating the C++ source for the QtGui module...
Creating the Makefile for the QtGui module...
Generating the C++ source for the QtHelp module...
Creating the Makefile for the QtHelp module...
Generating the C++ source for the QtMultimedia module...
Creating the Makefile for the QtMultimedia module...
Generating the C++ source for the QtNetwork module...
Creating the Makefile for the QtNetwork module...
Determining the OpenGL data types...
Generating the C++ source for the QtOpenGL module...
Creating the Makefile for the QtOpenGL module...
Generating the C++ source for the QtScript module...
Creating the Makefile for the QtScript module...
Generating the C++ source for the QtScriptTools module...
Creating the Makefile for the QtScriptTools module...
Generating the C++ source for the QtSql module...
Creating the Makefile for the QtSql module...
Generating the C++ source for the QtSvg module...
Creating the Makefile for the QtSvg module...
Generating the C++ source for the QtTest module...
Creating the Makefile for the QtTest module...
Generating the C++ source for the QtWebKit module...
Creating the Makefile for the QtWebKit module...
Generating the C++ source for the QtXml module...
Creating the Makefile for the QtXml module...
Generating the C++ source for the QtXmlPatterns module...
Creating the Makefile for the QtXmlPatterns module...
Generating the C++ source for the QtAssistant module...
Creating the Makefile for the QtAssistant module...
Generating the C++ source for the QtDesigner module...
Creating the Makefile for the QtDesigner module...
Generating the C++ source for the Qt module...
Creating the Makefile for the Qt module...
Creating QScintilla API file...
Creating top level Makefile...
Creating QPy support library for QtCore Makefile...
Creating QPy support library for QtGui Makefile...
Creating QPy support library for QtDesigner Makefile...
Creating QPy support libraries Makefile...
Creating pyuic4 wrapper...
Creating pyuic4 Makefile...
Creating pylupdate4 Makefile...
Creating pyrcc4 Makefile...
Creating Qt Designer plugin Makefile...
Creating pyqtconfig.py...
~/make
~/make install
5. Build and install QScintilla2 Python bindings
To build and install the Python bindings, run:
~/ cd Python
~/python configure.py
QScintilla 2.4.5 is being used.
PyQt 4.7.6 is being used.
Qt v4.6.2 free edition is being used.
SIP 4.11.1 is being used.
The QScintilla module will be installed in
/usr/lib/python2.6/dist-packages/PyQt4.
The QScintilla API file will be installed in /usr/share/qt4/qsci/api/python.
The QScintilla .sip files will be installed in /usr/share/sip/PyQt4.
The QScintilla module is being built with generated docstrings.
Generating the C++ source for the Qsci module...
Creating the Makefile for the Qsci module...
~/make
~/make install6. Download eric4-4.4.8.tar.gz and Install eric4
but I've not installed successfully and got err below:
~/python install.py
Checking dependencies
Python Version: 2.6.5
An internal error occured. Please report all the output of the program,
including the following traceback, to eric4-bugs@eric-ide.python-projects.org.
Traceback (most recent call last):
File "install.py", line 831, in
main(sys.argv)
File "install.py", line 744, in main
doDependancyChecks()
File "install.py", line 516, in doDependancyChecks
from PyQt4.QtCore import qVersion, PYQT_VERSION
RuntimeError: the sip module implements API v8.0 but the PyQt4.QtCore
"You probably updated sip to a newer version. Once you do this, you must either
update PyQt4 as well or build it from your sources using the newer sip. After
you've done this, don't forget to rebuild the QScintilla Python bindings. The
issue is not related to eric in any way."
~/sudo python install.py
[sudo] password for adam:
Checking dependencies
Python Version: 2.6.5
Found PyQt
Found QScintilla2
Qt Version: 4.6.2
PyQt Version: 4.7.6
QScintilla Version: 2.4.5
All dependencies ok.
Compiling user interface files...
Compiling source files...
Installing eric4 ...
Installation complete.
ref.: 1, http://nxforce.blogspot.com/2010/07/pyqt.html
2, http://lianix.blogspot.com/2009/12/pyqt-eric-windows.html
3, http://fire01312.javaeye.com/blog/703339
No comments:
Post a Comment